|
USE OF TEMPERATURE CONTROL UNIT:
- The control unit is easy to use.
- Plug your Ultra Lite Kiln into the receptacle on the control cord.
Turn control to the High setting (H) for 35 minutes to preheat the Kiln.
- To adjust the Kiln temperature, simply slide the control switch to
raise or lower temperature. You will need to wait about ten minutes
for the Kiln to adjust to the new setting.
- The circle symbol provided on the unit is a temperature of approximately
800ºF.
- The Black dot provided is a temperature of approximately 1300ºF.
- Preferred Silver Fusing temperature ranges from 900ºF-1300ºF
- To turn unit off, Slide the switch towards the red light until it
clicks in the off position (red light will stay on).
- You may mark the unit with a permanent marker to indicate your preferred
temperature settings.
|